FITTINGS AND ACCESSORIES:

Page 1 | 2 | 3 | 4 | Home

Rockler Woodworking and Hardware has everything you need to set up a complete, thorough, and efficient dust collection system – many of which are currently on sale!

#88551 4-INCH BLACK PLASTIC HOSE: Tough, lightweight ABS plastic for abrasion resistance a

#88486 BLAST GATES: Gates control the air flow so you can direct it to the dust source.

4-inch diameter opening

4-INCH QUICK DISCONNECT FITTINGS: Easy to attach and reattach to any 4-inch tool fitting. Choose from either #22425, which threads into your hose with the need for clamps; or #39620, which clamps to your existing hose. Both feature secure fit and quick disconnect.

22425

39620

Abrasion-resistant and durable. Made of tough, lightweight ABS plastic.

#88535 Splicer

#88543 4" Steel Base Clamp

#88494 Reducer 4" to 3"

#89195 Reducer 4" to 2-1/2"

#34654 Shop Vac Adapter

#30246 4" Hose & Pipe Hanger

#92031 Universal Dust Port

<font face="Arial, Helvetica, sans-serif">GROUNDING KIT</font>

GROUNDING KITS: No matter what type of central dust collection system you opt for, make sure it is properly grounded for optimum safety. Dust is a notorious fire hazard, especially fine dust, so you must make absolutely certain that your system is spark-free. Our grounding kit #18003

<font face="Arial, Helvetica, sans-serif">LESS MESS DUST COLLECTOR</font>

LESS MESS DUST COLLECTOR: If you just want to keep the sawdust from piling up around your table saw, our #20465 Less Mess Dust Collector offers a quick and easy solution.

<font face="Arial, Helvetica, sans-serif">DUST COLLECTOR SEPARATOR</font>

DUST COLLECTOR SEPARATOR: You can turn your JET DC-110 dust collector into a two-stage collector with the #27351 Dust Collection Separator. This 2-stage system operates with a cyclonic action to prefilter out the heaviest particles before they hit the impeller. This increases its particle-holding capacity, meaning it needs to be emptied far less often. It also cuts down on the wear and tear on the impeller, extending the life of the unit.

<font face="Arial, Helvetica, sans-serif">DUST COLLECTION BASICS BOOK</font>

DUST COLLECTION BASICS BOOK: #88444 Dust Collection Basics is a must-have to help you get the maximum effectiveness out of your dust collection system. It includes excellent tips on topics from ductwork to grounding.

4 inch Dust Collection Hose Starter Kit'
WIDTH=

Dust Collector Starter Kit and Hanger Clamps

Custom build your own two-machine dust collection system! 22-piece kit includes two elbows, two Y-fittings, two metal blast gates and sixteen 4" wire hose clamps. 4'' Dust Hose Hanger Clamps allow you to support hose anywhere in your shop.

2-Machine Dust Collector Starter Kit - 68665

Y-fittings are used to service more than one machine and provide increased lateral air flow. All 4" diameter fittings are manufactured from abrasion-resistant plastic. 4" hose sold separately. Whenever using plastic hose and fittings, we recommend grounding the system to eliminate static electricity.

Note: Whenever using plastic hose and fittings, we recommend grounding the system to eliminate static electricity. See our Grounding Kit

Sample Dust Collection Setup Dust Collection Example / Setup Optional Dust Collection Accessories.

Pack of 10 steel hanger clamps makes the installation of 4" diameter hose dust system quick and easy. Allows you to support flexible hose anywhere in your shop. 10 per pack. Screws not included.